FCC Web Documents citing 15.305

as compiled by hallikainen.com/FccRules on 2010 08 01

• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-1005A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-1005A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-1005A1.txt
  • PCS devices with the statement regarding coordination with UTAM, as is currently required by Section 15.311. In addition, the requirement to protect incumbent stations, as specified in Section 15.307(g) of our Rules, will no longer be applicable. ) at (202) 418-7474 (for matters pertaining to the UPCS rules discussed herein). 47 C.F.R. Part 15 Subpart D (incorporating §§ 15.301-15.323). Section 15.305 of our Rules describes the equipment authorization requirement for UPCS devices. 47 C.F.R. § 15.305. Additional coordination and labeling requirements are addressed in other sections of Subpart D of the Rules. Broadband PCS Entities and Fixed Microwave Service Licensees Reminded of April 4, 2005 Sunset of Relocation Cost Compensation and Microwave Cost Sharing Rules, Public Notice, DA 05-612 (WTB, rel.
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-01-158A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-01-158A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-01-158A1.txt
  • the actions should benefit small entities because it should make available increased business opportunities to small entities. We request comment on these assessments. D. Description of Projected Reporting, Recordkeeping and Other Compliance Requirements Part 15 transmitters are already required to be authorized under the Commission's certification procedure as a prerequisite to marketing and importation. See 47 C.F.R. §§ 15.101, 15.201, 15.305, and 15.405. Additionally, manufacturers of direct sequence spread spectrum systems must submit a determination of system processing gain to the Commission in order to obtain product certification. The proposed regulations will add permissible methods of operation for frequency hopping spread spectrum systems. No new reporting or recordkeeping requirements are proposed for the manufacturers of frequency hopping spread spectrum devices. However,
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-151A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-151A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-02-151A1.txt
  • or more employees, and therefore, unless one or more has exactly 500 employees do not qualify as small entities under the SBA definition. D. Description of Projected Reporting, Recordkeeping and Other Compliance Requirements. Part 15 transmitters are already required to be authorized under the Commission's certification procedure as a prerequisite to marketing and importation. See 47 C.F.R. §§ 15.101, 15.201, 15.305, and 15.405. The new regulations will add permissible methods of operation for frequency hopping spread spectrum systems and permit systems that use digital modulation techniques to operate in the bands formerly reserved for spread spectrum operation. No new reporting or recordkeeping requirements will be required for the manufacturers of frequency hopping spread spectrum devices or systems using digital modulation. This
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-223A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-223A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-223A1.txt
  • SBA definition. We therefore conclude that there are no more than 1,150 small manufacturers of radio and television broadcasting and wireless communications equipment. D. Description of Projected Reporting, Recordkeeping, and Other Compliance Requirements Part 15 transmitters are already required to be authorized under the Commission's certification procedure as a prerequisite to marketing and importation. See 47 C.F.R. §§ 15.101, 15.201, 15.305, and 15.405. The changes proposed in this proceeding would not change any of the current reporting or recordkeeping requirements. Further, the proposed regulations add permissible measurement techniques and methods of operation. The proposals would not require the modification of any exiting produces. Steps Taken to Minimize Significant Economic Impact on Small Entities, and Significant Alternatives Considered The RFA requires an
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-100A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-100A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-100A1.txt
  • and 999. Consequently, we estimate that the majority of wireless communications equipment manufacturers are small entities that may be affected by our action D. Description of Projected Reporting, Recordkeeping, and Other Compliance Requirements Part 15 transmitters are already required to be authorized under the Commission's certification procedure as a prerequisite to marketing and importation. See 47 C.F.R. §§ 15.101, 15.201, 15.305, and 15.405. The changes proposed in this proceeding would not change any of the current reporting or recordkeeping requirements. Further, the proposed regulations add permissible operating frequencies. The proposals would not require the modification of any existing produces. Steps Taken to Minimize Significant Economic Impact on Small Entities, and Significant Alternatives Considered The RFA requires an agency to describe any
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-165A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-165A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-165A1.txt
  • of between 500 and 999. Given the above, the Commission estimates that the great majority of wireless communications equipment manufacturers are small businesses. D. Description of Projected Reporting, Recordkeeping, and Other Compliance Requirements Part 15 transmitters are already required to be authorized under the Commission's certification procedure as a prerequisite to marketing and importation. See 47 C.F.R. §§ 15.101, 15.201, 15.305, and 15.405. The changes proposed in this proceeding would not change any of the current reporting or recordkeeping requirements. Further, the proposed regulations add permissible measurement techniques and methods of operation. The proposals would not require the modification of any existing products. Steps Taken to Minimize Significant Economic Impact on Small Entities, and Significant Alternatives Considered The RFA requires an
• http://www.fcc.gov/Bureaus/Engineering_Technology/Orders/2000/fcc00312.doc http://www.fcc.gov/Bureaus/Engineering_Technology/Orders/2000/fcc00312.pdf http://www.fcc.gov/Bureaus/Engineering_Technology/Orders/2000/fcc00312.txt
  • or more employees, and therefore, unless one or more has exactly 500 employees do not qualify as small entities under the SBA definition. D. Description of Projected Reporting, Recordkeeping and Other Compliance Requirements. Part 15 transmitters are already required to be authorized under the Commission's certification procedure as a prerequisite to marketing and importation. See 47 C.F.R. §§ 15.101, 15.201, 15.305, and 15.405. The new regulations will add permissible methods of operation for frequency hopping spread spectrum systems. No new reporting or recordkeeping requirements will be required for the manufacturers of frequency hopping spread spectrum devices. As previously noted, in the NPRM in this proceeding, the Commission also proposed a modified test procedure for certain direct sequence spread spectrum devices. Although