FCC Web Documents citing 95.625

as compiled by hallikainen.com/FccRules on 2010 07 01

• http://fjallfoss.fcc.gov/edocs_public/attachmatch/DA-07-1313A1.doc http://fjallfoss.fcc.gov/edocs_public/attachmatch/DA-07-1313A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://fjallfoss.fcc.gov/edocs_public/attachmatch/DA-07-881A1.doc http://fjallfoss.fcc.gov/edocs_public/attachmatch/DA-07-881A1.pdf
  • Rules regarding the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). OET has clarified that ARS transceivers designed ``such that they can easily be modified by the users to extend the operating frequency range into the frequency bands'' of the CB are CB transmitters, because they are intended to operate on the CB bands. Mr. Metzger states that he sold the agents a Connex
• http://fjallfoss.fcc.gov/edocs_public/attachmatch/DA-08-597A1.doc http://fjallfoss.fcc.gov/edocs_public/attachmatch/DA-08-597A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-2069A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-2069A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-05-2069A1.txt
  • Rules regarding the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). The Office of Engineering and Technology of the Commission (``OET'') has clarified that ARS transceivers designed ``such that they can easily be modified by the users to extend the operating frequency range into the frequency bands'' of the CB are CB transmitters, because they are intended to operate on the CB bands. On
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1334A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1334A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1334A1.txt
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1936A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1936A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-1936A1.txt
  • Rules regarding the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). OET has clarified that ARS transceivers designed ``such that they can easily be modified by the users to extend the operating frequency range into the frequency bands'' of the CB are CB transmitters, because they are intended to operate on the CB bands. On November 26, 2001 and November 15, 2002, the Dallas
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-2549A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-2549A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-06-2549A1.txt
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Further, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-07-1313A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-07-1313A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-07-1313A1.txt
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-07-881A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-07-881A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-07-881A1.txt
  • Rules regarding the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). OET has clarified that ARS transceivers designed ``such that they can easily be modified by the users to extend the operating frequency range into the frequency bands'' of the CB are CB transmitters, because they are intended to operate on the CB bands. Mr. Metzger states that he sold the agents a Connex
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-461A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-461A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-461A1.txt
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-597A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-597A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-08-597A1.txt
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-259063A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-259063A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). On May 9, 2001, the Tampa Office issued a Citation to Hightech for violation of Section 302(b) of the Communications Act, and Sections 2.803(a)(1) and 2.815(b) of Commission's Rules by, among other things, offering for sale a 10-Meter ARS radio that could be easily modified to operate on CB frequencies, i.e., a non-certified
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-260457A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-260457A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-264507A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-264507A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-264848A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-264848A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-264948A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-264948A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-265629A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-265629A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-269020A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-269020A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). On March 21, 2006, Mr. Metzger received a Citation for violation of Section 302(b) of the Act and Section 2.803(a)(1) of the Rules, by offering for sale various non-certified CB transceivers, including Connex model CX 3300HP. On June 22, 2006, an agent purchased a Connex CX 3300HP from the 1 Stop CB Shop.
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-276378A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-276378A1.pdf
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-277836A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-277836A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-281214A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-281214A1.pdf
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.'' Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-238A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-238A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-238A1.txt
  • 95 continues to read as follows: AUTHORITY: Sections 4, 303, 48 Stat. 1066, 1082, as amended; 47 U.S.C. 154, 303. Section 95.655 is amended by revising paragraph (a) to read as follows: § 95.655 Frequency Capability (a) No transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in § 95.625, and no transmitter will be certificated for use in the GMRS if it is equipped with a frequency capability not listed in § 95.621, unless such transmitter is also certificated for use in another radio service for which the frequency is authorized and for which certification is also required. (Transmitters with frequency capability for the Amateur Radio Services and Military
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-32A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-32A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-32A1.txt
  • multiple MICS devices and users. These rules establish 10 channels of 300 kHz each for this service within the allotted bandwidth (47 C.F.R. § 95.628(c) (d)), provide for frequency sharing and cooperation in the selection and use of channels (47 C.F.R. § 95.1211), and establish specific guidelines for frequency monitoring prior to transmission by implant programmer/control transmitters (47 C.F.R. § 95.625(a)). We also provided that a MICS device could transmit without prior frequency monitoring, pursuant to a non-radio frequency actuation signal generated by a device external to the body (manual activation) (47 C.F.R. § 95.1209(b)), or in response to a medical implant event (47 C.F.R. §§ 95.628(b), 95.1209(b)). Given these protections, the National Telecommunications and Information Administration (NTIA), representing the incumbent
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-33A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-33A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-33A1.txt
  • multiple MICS devices and users. These rules establish 10 channels of 300 kHz each for this service within the allotted bandwidth (47 C.F.R. § 95.628(c), (d)), provide for frequency sharing and cooperation in the selection and use of channels (47 C.F.R. § 95.1211), and establish specific guidelines for frequency monitoring prior to transmission by implant programmer/control transmitters (47 C.F.R. § 95.625(a)). Given these protections, the National Telecommunications and Information Administration (NTIA), representing the incumbent Federal user entitled to exclusive use of this band, interposed no objection to this allocation. On, February 12, 2003, the Commission found that the Philos DR-T, lacking a listen-before-talk function, does not comply with the Commission's rules when it sends regular, pre-programmed transmissions, although it operates within
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-06-1A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-06-1A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-06-1A1.txt
  • Order''), 14 FCC Rcd, 21040 (1999). Id. at 21042-43. In this band, Metaids currently operates radiosondes, which are automatic transmitters, usually carried on an aircraft, free balloon, kite, or parachute, which transmit meteorological data during their journey through the atmosphere. (See 47 C.F.R. § 2.1.) Id. at 21046. 47 C.F.R. § 95.628(c), (d). 47 C.F.R. § 95.1211. 47 C.F.R. § 95.625(a). The Commission also provided that a MICS device could transmit without prior frequency monitoring, pursuant to a non-radio frequency actuation signal generated by a device external to the body (manual activation) (47 C.F.R. § 95.1209(b)), or in response to a medical implant event (47 C.F.R. §§ 95.628(b), 95.1209(b)). These functions are not the subject of the instant waiver request. NTIA
• http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-10-106A1.doc http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-10-106A1.pdf http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-10-106A1.txt
  • Removed Interference (CB) 95.424 Removed Servicing CB equipment 95.425 95.33 Changes to CB transmitter 95.426 95.11 Station inspection (CB) 95.427 95.11 Station records (CB) 95.428 95.17 Contacting FCC (CB) 95.601 95.1 Basis and Purpose 95.603 95.33 Equipment certification required 95.605 95.33 Equipment certification procedures 95.607 95.33 CB transmitter modification 95.621 95.37, 95.103 GMRS channel frequencies 95.623 95.205 R/C channel frequencies 95.625 95.307 CB channel frequencies 95.627 95.403 FRS channel frequencies 95.628 95.715 Medradio transmitters 95.629 95.503 LPRS channel frequencies 95.630 95.603 WMTS channel frequencies 95.631 95.41 Emission types 95.632 95.803 MURS channel frequencies 95.633 95.39 Emission bandwidth 95.635 95.41 Unwanted emissions 95.637 95.43 Modulation standards 95.639 95.35 Transmitting power 95.643 95.33 DSRCS-OBU equipment certification 95.645 95.33 Control accessibility 95.647 95.45 FRS
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-259063A1.html
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.''12 Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies).13 9. On May 9, 2001, the Tampa Office issued a Citation to Hightech for violation of Section 302(b) of the Communications Act, and Sections 2.803(a)(1) and 2.815(b) of Commission's Rules by, among other things, offering for sale a 10-Meter ARS radio that could be easily modified to operate on CB frequencies, i.e., a
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-260457A1.html
  • changes to the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.''15 Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies).16 Also, the Commission's Office of General Counsel (``OGC'') released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that ``have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-264507A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-264848A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-264948A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-265629A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-269020A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). 9. On March 21, 2006, Mr. Metzger received a Citation for violation of Section 302(b) of the Act and Section 2.803(a)(1) of the Rules, by offering for sale various non-certified CB transceivers, including Connex model CX 3300HP. On June 22, 2006, an agent purchased a Connex CX 3300HP from the 1 Stop CB
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-276378A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-277836A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/FieldNotices/2003/DOC-281214A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/Orders/2005/DA-05-2069A1.html
  • Rules regarding the CB type acceptance requirements by defining a ``CB Transmitter'' as ``a transmitter that operates or is intended to operate at a station authorized in the CB.''13 Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies).14 The Office of Engineering and Technology of the Commission (``OET'') has clarified that ARS transceivers designed ``such that they can easily be modified by the users to extend the operating frequency range into the frequency bands'' of the CB are CB transmitters, because they are intended to operate on the CB bands.15 9.
• http://www.fcc.gov/eb/Orders/2006/DA-06-1334A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/Orders/2006/DA-06-1936A1.html
  • Rules regarding the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). OET has clarified that ARS transceivers designed "such that they can easily be modified by the users to extend the operating frequency range into the frequency bands" of the CB are CB transmitters, because they are intended to operate on the CB bands. 12. On November 26, 2001 and November 15, 2002, the
• http://www.fcc.gov/eb/Orders/2006/DA-06-2549A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Further, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/Orders/2007/DA-07-1313A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/eb/Orders/2007/DA-07-881A1.html
  • Rules regarding the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). OET has clarified that ARS transceivers designed "such that they can easily be modified by the users to extend the operating frequency range into the frequency bands" of the CB are CB transmitters, because they are intended to operate on the CB bands. 10. Mr. Metzger states that he sold the agents a
• http://www.fcc.gov/eb/Orders/2008/DA-08-597A1.html
  • changes to the CB type acceptance requirements by defining a "CB Transmitter" as "a transmitter that operates or is intended to operate at a station authorized in the CB." Section 95.655(a) of the Rules also states that no transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listed in Section 95.625 of the Rules (CB transmitter channel frequencies). Also, the Commission's Office of General Counsel ("OGC") released a letter on the importation and marketing of ARS transmitters, which clarified that transmitters that "have a built-in capacity to operate on CB frequencies and can easily be altered to activate that capacity, such as by moving or removing a jumper plug or cutting
• http://www.fcc.gov/oet/ea/presentations/files/oct05/Licensed_Devices_SD.pdf
  • in 95.639, also see 95.210. Section 95.603(b) provides and exemption from Certification for crystal controlled 26-27 MHz transmitters 132 October, 2005 TCB Workshop 132 Part 95 Personal Radio Services Subpart C -Radio Control Service (R/C) Special Requirements: Integral Antenna required. External crystal access prohibited. Subpart D -Citizens Band Radio Service (CB) Operating Frequency Band: 26.965 -27.405 MHz General Technical Requirements: 95.625(b) -Frequency Tolerance 95.631 -Emission Types 95.633 -Emission Bandwidth 95.635 -Unwanted Radiation 47 CFR Part 95 Subpart D is the Citizens Band Radio Service. Nooperators license is required to use CB equipment. For the CB service sections 95.407 and 95.625 address available channels. Additional information about 95.631 emission types is available in 95.412 and 95.413. 133 October, 2005 TCB Workshop 133
• http://www.fcc.gov/oet/ea/presentations/files/oct05/Personal_Radio_Overview_AL.pdf
  • Crystals ­Crystal Control ­Per 95.645(b), plug in crystals may not be accessible by the end user ­Crystal Access -Per 95.645(b), application must contain statement about accessibility of crystal ­Use Grant Note RC 9 October 2005 TCB Workshop 9 Part 95D Part 95D --Citizens Band Radio Service (CB) Citizens Band Radio Service (CB) Frequency Band: ­26.965 -27.405 MHz General Technical Requirements: ­95.625(b) -Frequency Tolerance ­95.631 -Emission Types ­95.633 -Emission Bandwidth ­95.635 -Unwanted Radiation 47 CFR Part 95 Subpart D is the Citizens Band Radio Service. Nooperators license is required to use CB equipment. For the CB service sections 95.407 and 95.625 address available channels. Additional information about 95.631 emission types is available in 95.412 and 95.413. 10 October 2005 TCB Workshop 10
• http://www.fcc.gov/oet/ea/presentations/files/oct09/ComboDevicesSummary_Oct09_AL.pdf
  • (Note: Part 15 is indoors only) Section 97.11(b) states: The station must be separate from and independent of all other radio apparatus installed on the ship or aircraft except for 87 Aviation VHF 118-136.975 MHz band Section 95.665(a) states: No transmitter will be certificated for use in the CB service if it is equipped with a frequency capability not listedin §95.625, and no transmitter will be certificated for use in the GMRS if it is equipped with a frequency capability not listed in §95.621, unless such transmitter is also certificated for use in another radio service for which thefrequency is authorized and for which certification is also required. (Transmitters with frequency capability for the Amateur Radio Services and MilitaryAffiliate Radio System